Power Section Specification
962-6760
9.625" 6:7 Lobes 6.0 Stages
Rotor Specifications
Overall Length 240.00 in
Avg. Diameter 5.548 in
Contour Length 233.00 in
Eccentricity 0.428 in
Major Diameter 6.403 in
Head Diameter 5.500 in
Head Length 7.00 in
Weight 1612 lb
Thread Form 4" API FH
Stator Specifications
Overall Length 250.00 in
Tube OD 9.62 in
Contour Length 232.00 in
Tube ID 7.880 in
Rubber Cut-back
Side 1: 9.00 in
Side 2: 9.00 in
Weight 1867 lb
Material Alloy Steel
Performance Specifications
Flow Range 600-1200 GPM
Rev per Unit Volume 0.13 Rev/Gal
Speed Range 78-156 RPM
No Load Pressure Loss 161 psi
  XTH
Max Rec Press 1,510 psi
Torque @ Max Press 31,310 ft-lbs
Stall Pressure 2,260 psi
Stall Torque 46,970 ft-lbs
Stator Minors and Fit (in) at 70°F
  XTH
Group Minor Fit
0 5.543 0.005
Reline Lengths (in) Max 250 Min 244 Alternate Stator OD (in): 11.250 / -
Torque
Differential Pressure (psi) 0 1,000 Torque (ft-lb) 0
Fit Increase
Change in Temperature (°F) 0 100 200 300 Fit Increase (in) 0
Speed
Differential Pressure (psi) 0 1,000 Speed (RPM) 0
Mechanical Power
Differential Pressure (psi) 0 1,000 2,000 Mechanical Power (hp) 0 1,000
Torque
Differential Pressure (psi) 0 500 1,000 1,500 Torque (ft-lb) 0 10,000 20,000 30,000 40,000
Fit Increase
Change in Temperature (°F) 0 50 100 150 200 250 300 350 Fit Increase (in) 0 0.05 0.1 0.15
Speed
600 GPM 900 GPM 1200 GPM Differential Pressure (psi) 0 500 1,000 1,500 Speed (RPM) 0 50 100 150 200
Mechanical Power
600 GPM 900 GPM 1200 GPM Differential Pressure (psi) 0 500 1,000 1,500 2,000 Mechanical Power (hp) 0 200 400 600 800 1,000
©2026 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV. Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
PS App v.